The metal fiber burner cannot see fire during use mainly because it operates in infrared radiation mode, and combustion occurs inside the metal fiber fabric rather than above the surface. After the gas and air are pre mixed, they burn inside a metal fiber mesh with uniform permeability. The fibers are heated to an incandescent state (about 800-1100 ℃), and the heat is released through infrared radiation. The flame itself is extremely small and almost invisible to the eye.
The design of flameless combustion ensures uniform distribution of surface combustion temperature, no local high temperature, and smoother heating. The fully premixed combustion of gas and air effectively suppresses the generation of nitrogen oxides. In infrared mode, NOx emissions can be below 10ppm and CO emissions can be below 25ppm.
And there is no risk of fireback during use, with low thermal inertia. It quickly cools down within 5 seconds after turning off the engine, with a maximum thermal intensity of 2500kW/m ².
Rondatex offers high quality FeCrAl metal fiber for gas infrared burners.Our products serve industries such as food baking and grilling, textile shaping and pre drying, coating and printing drying, automotive coating curing, glass annealing, asphalt heaters, etc.

Email
Tel/Wechat








Home
Tel
Products